Initialization of power window

If the vehicle’s battery is disconnected due to situations such as battery or fuse replacement, the following functions will be deactivated.

One-touch auto up/down function Anti-entrapment function

Initialize the power window using the following procedure to reactivate these functions.

1. Close the driver’s door.

2. Turn the ignition switch to the “ON” position.

3. Open the driver’s side window halfway by pushing down the power window switch.

4. Pull up the power window switch and close the window completely. Continue pulling up the switch for approximately 1 second after the window is closed completely.

5. Open the driver’s side window completely by fully pushing down the power windows switch.