Vehicle Dynamics Control warning light (U.S.- spec models and Canada-spec. models)/Vehicle Dynamics Control operation indicator light (all models)

Subaru Tribeca / Subaru Tribeca 2006-2024 Owners Manual / Instruments and controls / Warning and indicator lights / Vehicle Dynamics Control warning light (U.S.- spec models and Canada-spec. models)/Vehicle Dynamics Control operation indicator light (all models)

▲ Vehicle Dynamics Control warning


Vehicle Dynamics Control warning light (U.S.-spec models and Canada-spec. models)

CAUTION

The Vehicle Dynamics Control system provides its ABS control through the electrical circuit of the ABS system. Accordingly, if the ABS is inoperative, the Vehicle Dynamics Control system becomes unable to provide ABS control. As a result, the Vehicle Dynamics Control system also becomes inoperative, causing the warning light to illuminate.

Though both the Vehicle Dynamics Control and ABS systems are inoperative in this case, the ordinary functions of the brake system are still available. You will be safe while driving with this condition, but drive carefully and have your vehicle checked at a SUBARU dealer as soon as possible.

NOTE

If the electrical circuit of the Vehicle Dynamics Control system itself malfunctions, the warning light only illuminates.

At this time, the ABS (Anti-lock Brake System) remains fully operational.

The warning light illuminates when the electronic control system of the ABS/Vehicle Dynamics Control system malfunctions.

The Vehicle Dynamics Control system is probably inoperative under any of the following conditions. Have your vehicle checked at a SUBARU dealer immediately.

The warning light does not illuminate when the ignition switch is turned to the “ON” position.

The warning light illuminates while the vehicle is running.

NOTE

If the warning light behavior is as described in the following examples, the Vehicle Dynamics Control system may be considered normal.

The warning light illuminates right after the engine is started but turns off immediately, remaining off.

The warning light illuminates after the engine has started and turns off while the vehicle is subsequently being driven.

The warning light illuminates during driving, but it turns off immediately and remains off.

Vehicle Dynamics Control operation indicator light

U.S.-spec. models and Canada-spec.

models:

The indicator light flashes during activation of the skid suppression function and during activation of the traction control function.

NOTE

The light may remain illuminated for a short period of time after the engine has been started, especially in cold weather. This does not indicate the existence of a problem. The light should turn off as soon as the engine has warmed up.

The indicator light illuminates when the engine has developed a problem and the CHECK ENGINE warning light/ malfunction indicator light is on.

Latin America-spec. models:

The indicator light flashes when the skid suppression function is activated. It illuminates when only the traction control function is operating.

The Vehicle Dynamics Control system is probably malfunctioning under any of the following conditions. Have your vehicle checked at a SUBARU dealer as soon as possible .

The light does not illuminate when the ignition switch is turned to the “ON” position.

The light does not turn off even after the lapse of several minutes (the engine has warmed up) after the engine has started (U.S.-spec. models and Canadaspec.

models)/even after a period of approximately 2 seconds after the ignition switch has been turned to the “ON” position (Latin America-spec. models).