TucsonDataManu

.com

Hyundai Tucson: Instrument cluster control

Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual / Instrument cluster / Instrument cluster control

4.2-inch

10.25-inch

10.25-inch

The actual cluster in the vehicle may differ from the illustration.

For more information, refer to "Gauges and meters" section in this chapter.

Tachometer
Speedometer
Engine coolant temperature gauge
Fuel gauge
Warning and indicator lights
LCD display

Instrument panel illumination

When the vehicle's parking lights or headlamps are on, press the illumination control switch to adjust the brightness of the instrument panel illumination.

When pressing the illumination control switch, the interior switch illumination intensity also adjusted.

You can adjust the brightness of the instrument panel illumination from the User Settings Mode on the LCD display when the ignition switch is on ('Lights → Illumination'). When the vehicle's parking lights or headlamps are on, interior switch illumination intensity and mood lamps are also adjusted.

If your vehicle is equipped with additional navigation, please refer to the infotainment system manual separately supplied.

WARNING

Never adjust the instrument cluster while driving. This could result in loss of control and lead to an accident that may cause vehicle damage, or lead to serious injury or death.

The brightness of the instrument panel illumination is displayed.
When the brightness setting reaches either the minimum or maximum level, a chime will sound.

Gauges and meters

Speedometer The speedometer indicates the speed of the vehicle and is calibrated in miles per hour (MPH) and/or kilometers per hour (km/h). Tachometer The tachometer indicates the approximate number of engine revolutions per minute (R

Warning and indicator lights

Information Make sure that all warning lights are OFF after starting the engine. If any light is still ON, this indicates a situation that needs attention. Seat belt warning light This warning light informs the driver that the seat belt is

LCD Display Messages for Vehicles Equipped with Smart Key

Shift to P This message is displayed if you try to turn off the vehicle without the gear in the P (Park) position. If this occurs, the Engine Start/Stop button turns to the ACC position. Low key battery When the Engine Start/Stop button is

SEE MORE:

Remote Smart Parking Assist (RSPA)

Remote Smart Parking Assist uses vehicle sensors to help the driver park and exit parking spaces remotely from outside the vehicle by controlling the steering wheel, vehicle speed and gearshifts. Remote Forward/Backward function helps

Evaporative Emission Control System- Installation

Install in the reverse order of removal. Inspection Check for the following items visually. Cracks or leakage of the canister Loose connection, distortion, or damage of the vapor hose/tube Canister→ Atmosphere Canister →