The items in the date and time settings can be set. To change the items, operate the or
switch.

NOTE

● The “Date” item must be set to display the “Birthday”, “Anniversary” and notifications for vehicle maintenance.

● The “Birthday” and “Anniversary” items can be entered after the “Date” item has been set.

● Dates that do not exist in the Gregorian calendar cannot be set (for example, April 31).

Preparation for date setting

1. Turn the ignition switch to the “ON” position.

2. Pull and hold the “ /SET” switch
toward you to show the selection screen

3. After the selection screen is displayed, operate the or
switch to show the
“Date” item. Then, pull the “ /SET”
switch toward you.

Current date and time setting

1. Perform the preparation steps according to “Preparation for date setting” F3- 49.

2. Operate the or
switch to
select the “Date” item. Then pull the “ /
SET” switch toward you.

3. Select the item to set by operating the or
switch. Then pull the “
/SET”
switch toward you.

4. Select a number by operating the
or switch. Then pull the “
/SET”
switch toward you. When “12 h” is selected, the clock will be set to a 12- hour display. When “24 h” is selected, the clock will be set to a 24-hour display.

5. After entering the date and time, select “Set” by operating the switch and
confirm the setting by pulling the “
/SET” switch toward you.

6. The system will notify you that the setting is complete.

Birthday setting

1. Perform the preparation steps according to “Preparation for date setting” F3- 49.

2. Operate the or
switch to
select the “Birthday” item. Then pull the “ /SET” switch toward you.

3. Select the item to set by operating the or
switch. Then pull the “
/SET”
switch toward you.

4. The selected item will be shown.

– Pull the “ /SET” switch toward
you to set the selected item.

– If you want to select the other item, operate the switch to go back to
step 3.

5. Select numbers by operating the
or switch. Then pull the “
/SET” switch toward you.

6. After entering the date by repeating step 5, you can enter the name.

7. Select characters by operating the or
switch. Then pull the “
/ SET” switch toward you.

– You can select characters of the English alphabet (upper case characters and lower case characters are available), eleven symbols or blank spaces.

– The word being edited will be displayed with an underline.

8. After entering the name by repeating step 7, select “Set” by operating the
switch and confirm the setting by pulling the “ /SET” switch toward you.

9. The system will notify you that the setting is complete.

If a birthday is approaching, the following screen will be displayed accompanied by a beep when the ignition switch has been turned to the “ON” position. This function can be set to on or off. For details, refer to “Bypass screen setting” .

NOTE

If “_ _” is selected for either the “Month” or “Day” item instead of numbers, the birthday notification will be deactivated.

Anniversary setting

1. Perform the preparation steps according to “Preparation for date setting” F3- 49.

2. Operate the or
switch to
select the “Anniversary” item. Then pull the “ /SET” switch toward you.

3. Select the item to set by operating the or
switch. Then pull the “
/SET”
switch toward you.

4. The selected item will be shown.

– Pull the “ /SET” switch toward
you to set the selected item.

– If you want to select another item, operate the switch to go back to
step 3.

5. Select numbers by operating the
or switch. Then pull the “
/SET”
switch toward you.

6. After entering the date by repeating step 5, you can enter the name.

7. Select characters by operating the or
switch. Then pull the “
/
SET” switch toward you.

– You can select characters of the English alphabet (upper case characters and lower case characters are available), eleven symbols or blank spaces.

– The word being edited will be displayed with an underline.

8. After entering the name by repeating step 7, select “Set” by operating the
switch and confirm the setting by pulling the “ /SET” switch toward you.

9. The system will notify you that the setting is complete.

If an anniversary is approaching, the following screen will be displayed accompanied by a beep when the ignition switch has been turned to the “ON” position. This function can be set to on or off. For details, refer to “Bypass screen setting” .

On an anniversary (displayed in orange)

NOTE

If “_ _” is selected for either the “Month” or “Day” item instead of numbers, the anniversary notification will be deactivated.

Clearing birthday or anniversary

1. Perform the preparation steps according to “Preparation for date setting”  and display “Birthday” or “Anniversary” on the screen.

2. Select the preferred birthday/anniversary.

3. When “_ _” is selected for either the “Month” or “Day” item instead of numbers, the setting of “Birthday” or “Anniversary” will be cleared.

Daylight saving time setting

1. Perform the preparation steps according to “Preparation for date setting” F3- 49.

2. Operate the or
switch to
select the “Daylight Saving Time” item.

Then pull the “ /SET” switch toward
you.

3. The current setting will be displayed.

Pull the “ /SET” switch toward you
to enter the selection mode.

4. Select “On” or “Off” by operating the or
switch. Then pull the “
/SET” switch toward you.

5. Select “Set” by operating the
switch, and confirm the setting by pulling the “ /SET” switch toward you.

6. The system will notify you that the setting is complete.