TucsonDataManu

.com

Hyundai Tucson: Instrument cluster control

Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual / Instrument cluster / Instrument cluster control

4.2-inch

„10.25-inch

„10.25-inch

The actual cluster in the vehicle may differ from the illustration.

The actual cluster in the vehicle may differ from the illustration.

For more information, refer to "Gauges and meters" section in this chapter.

  1. Tachometer
  2. Speedometer
  3. Engine coolant temperature gauge
  4. Fuel gauge
  5. Warning and indicator lights
  6. LCD display

Instrument panel illumination

When the vehicle's parking lights or headlamps are on, press the illumination control switch to adjust the brightness of the instrument panel illumination.

When pressing the illumination control switch, the interior switch illumination intensity also adjusted.

You can adjust the brightness of the instrument panel illumination from the User Settings Mode on the LCD display when the ignition switch is on ('Lights → Illumination'). When the vehicle's parking lights or headlamps are on, interior switch illumination intensity and mood lamps are also adjusted.

If your vehicle is equipped with additional navigation, please refer to the infotainment system manual separately supplied.

WARNING

Never adjust the instrument cluster while driving. This could result in loss of control and lead to an accident that may cause vehicle damage, or lead to serious injury or death.

  • The brightness of the instrument panel illumination is displayed.
  • When the brightness setting reaches either the minimum or maximum level, a chime will sound.

READ NEXT:

 Gauges and meters

Speedometer The speedometer indicates the speed of the vehicle and is calibrated in miles per hour (MPH) and/or kilometers per hour (km/h). Tachometer The tachometer indicates the approximate number of engine revolutions per minute (R

 Warning and indicator lights

Information Make sure that all warning lights are OFF after starting the engine. If any light is still ON, this indicates a situation that needs attention. Seat belt warning light This warning light informs the driver that the seat belt is

 LCD Display Messages for Vehicles Equipped with Smart Key

Shift to P This message is displayed if you try to turn off the vehicle without the gear in the P (Park) position. If this occurs, the Engine Start/Stop button turns to the ACC position. Low key battery When the Engine Start/Stop button is

SEE MORE:

 Rear Door Trim - Replacement

Pull down the rear door window glass to the lowest level by pressing the power window glass switch. Remove the rear door belt outside weatherstrip (A). To install, reverse the removal procedure. WARNING Replace any damaged cli

 Climate control additional features

Auto Defogging System on Models with Automatic Temperature Control Auto defogging helps reduce the possibility of fogging up the inside of the windshield by automatically sensing the moisture on inside the windshield. The auto defogging sy

Information