TucsonDataManu

.com

Hyundai Tucson: Good driving practices

Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual / Driving your vehicle / Automatic transmission / Good driving practices

  • Never move the shift button from P (Park) or N (Neutral) to any other position with the accelerator pedal depressed.
  • Never move the shift lever/button into P (Park) when the vehicle is in motion.

    Be sure the vehicle is completely stopped before you attempt to shift into R (Reverse) or D (Drive).

  • Do not move the shift button to N (Neutral) when driving. Doing so may result in an accident because of a loss of engine braking and the transmission could be damaged.
  • Driving uphill or downhill, shift to D (Drive) to drive forward or R (Reverse) to drive backwards, and check the gear position indicated on the cluster before driving. If the vehicle is moving in the opposite direction of the selected gear, the engine may stop and a serious accident may occur. Never attempt to select a gear that is opposite to the direction of the vehicle motion. Stop the vehicle before changing to the desired gear.
  • Do not drive with your foot resting on the brake pedal. Even light, but consistent pedal pressure can result in the brakes overheating, brake wear and possibly even brake failure.
  • When driving with shifter paddles, slow down before shifting to a lower gear. Otherwise, the lower gear may not be engaged if the engine RPMs are outside of the allowable range.
  • Always apply the parking brake when leaving the vehicle. Do not depend on placing the transmission in P (Park) to keep the vehicle from moving.
  • Exercise extreme caution when driving on a slippery surface. Be especially careful when braking, accelerating or shifting gears. On a slippery surface, an abrupt change in vehicle speed can cause the drive wheels to lose traction and may cause loss of vehicle control resulting in an accident.
  • Optimum vehicle performance and economy is obtained by smoothly depressing and releasing the accelerator.

WARNING

To reduce the risk of SERIOUS INJURY or DEATH:

  • ALWAYS wear your seatbelt. In a collision, an unbelted occupant is significantly more likely to be seriously injured or killed than a properly belted occupant.
  • Avoid high speeds when cornering or turning.
  • Do not make quick steering wheel movements, such as sharp lane changes or fast, sharp turns.
  • The risk of rollover is greatly increased if you lose control of your vehicle at highway speeds.
  • Loss of control often occurs if two or more wheels drop off the roadway and the driver over steers to reenter the roadway.
  • In the event your vehicle leaves the roadway, do not steer sharply.

    Instead, slow down before pulling back into the travel lanes.

  • HYUNDAI recommends you follow all posted speed limits.

    READ NEXT:

     Braking system

    Power-assist brakes Your vehicle has power-assisted brakes that adjust automatically through normal usage. If the engine is not running or is turned off while driving, the power assist for the brakes will not work. You can still stop your ve

     Electronic Parking Brake (EPB)

    Applying the parking brake To apply EPB (Electronic Parking Brake): Depress and hold the brake pedal. Pull up the EPB switch. Make sure the Parking Brake warning light comes on. EPB (Electronic Parking Brake) may be automatically app

     Anti-lock Brake System (ABS)

    WARNING Anti-Lock Braking System (ABS) or Electronic Stability Control (ESC) system will not prevent accidents due to improper or dangerous driving maneuvers. Even though vehicle control is improved during emergency braking, always maintain a

    SEE MORE:

     Button Engine Start System

    Description The System offers the following features : Changing the state of engine ignition and power by using the start button. Controlling external relays for ACC / IGN1 / IGN2 terminal switching and STARTER, without use of mechanical

     Tail Gate Window Glass - Installtion

    Using a cutting knife (A), remove the remaining sealant (B) on the body panel. Apply the body primer to the bonding surface of body panel. WARNING Be careful not to touch the surface covered with the primer because touching

    Information