TucsonDataManu

.com

Hyundai Tucson: Trailer towing equipment

Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual / Driving your vehicle / Trailer towing / Trailer towing equipment

Hitches

Information

Information

The mounting hole for hitches are located on both sides of the underbody behind the rear tires.

It's important to have the correct hitch equipment. Crosswinds, large trucks going by, and rough roads are a few reasons why you'll need the right hitch.

Here are some rules to follow:

  • Do you have to make any holes in the body of your vehicle when you install a trailer hitch? If you do, then be sure to seal the holes later when you remove the hitch. If you don't seal them, carbon monoxide (CO) from your exhaust can get into your vehicle, as well as dirt and water.
  • The bumpers on your vehicle are not intended for hitches. Do not attach rental hitches or other bumper-type hitches to them. Use only a frame-mounted hitch that does not attach to the bumper.
  • Any part of the rear number plate or lighting devices of the vehicle must not be obscured by the mechanical coupling device.

    If the rear number plate and/or lighting devices can be obscured partially by any part of the mechanical coupling device, mechanical coupling devices that can not be easily removed or repositioned without use of any tools, except an easily operated (i.e. an effort not exceeding 20Nm) release key which is supplied by the manufacturer of the coupling device, are not permitted for use.

    Please note that the mechanical coupling device that is fitted and not in use must always be removed or repositioned if the rear number plate and/or rear lighting devices are obscured by any part of the mechanical coupling device.

  • A HYUNDAI trailer hitch accessory is available at an authorized HYUNDAI dealer.

Safety chains

You should always attach chains between your vehicle and your trailer.

Instructions about safety chains may be provided by the hitch manufacturer or trailer manufacturer. Follow the manufacturer's recommendation for attaching safety chains. Always leave just enough slack so you can turn with your trailer. And, never allow safety chains to drag on the ground.

Trailer brakes

If your trailer is equipped with a braking system, make sure it conforms to your country's regulations and that it is properly installed and operating correctly.

If your trailer weighs more than the maximum trailer weight without trailer brakes loaded, then it needs its own brakes and they must be adequate. Be sure to read and follow the instructions for the trailer brakes so you'll be able to install, adjust and maintain them properly. Be sure not to modify your vehicle's brake system.

WARNING

Do not use a trailer with its own brakes unless you are absolutely certain that you have properly set up the brake system. This is not a task for amateurs.

Use an experienced, competent trailer shop for this work.

    READ NEXT:

     Driving with a trailer

    Towing a trailer requires a certain amount of experience. Before setting out for the open road, you must get to know your trailer. Acquaint yourself with the feel of handling and braking with the added weight of the trailer. And always keep in

     Vehicle load limit

    Two labels on your driver's door sill show how much weight your vehicle was designed to carry: the Tire and Loading Information Label and the Certification Label. Before loading your vehicle, familiarize yourself with the following terms for

     Driver assistance system

    SEE MORE:

     Occupant Classification System (OCS)

    Your vehicle is equipped with an Occupant Classification System (OCS) in the front passenger's seat. Main components of the Occupant Classification System A detection device located within the front passenger seat cushion. Electronic

     Curtain Air Bag (CAB)

    Components Location Curtain Air Bag (CAB) Removal Disconnect the batteiy negative terminal. WARNING After disconnecting the cables, wait at least 3 minutes. Remove the roof trim. (Refer to Body - "Roof Trim Assembly"

    Information