TucsonDataManu

.com

Hyundai Tucson: Driving Safety

Hyundai Tucson - Fourth generation (NX4) - (2020-2023) - Owner's Manual / Driver assistance system / Driving Safety

Forward Collision

Avoidance Assist (FCA) (Front view camera only)

Basic function

Forward Collision-Avoidance Assist is

Forward Collision-Avoidance Assist is designed to help detect and monitor the vehicle ahead or help detect a pedestrian or cyclist in the roadway and warn the driver that a collision is imminent with a warning message and an audible warning, and if necessary, apply emergency braking.

Detecting sensor

[1] : Front view camera

[1] : Front view camera

Refer to the picture above for the detailed location of the detecting sensor.

CAUTION

Take the following precautions to maintain optimal performance of the detecting sensor:

  • NEVER disassemble the detecting sensor or sensor assembly, or apply any impact on it.
  • If the detecting sensor have been replaced or repaired, we recommend that you have your vehicle inspected by an authorized HYUNDAI dealer.
  • NEVER install any accessories or stickers on the front windshield, or tint the front windshield.
  • Pay extreme caution to keep the front view camera dry.
  • NEVER place any reflective objects (i.e. white paper, mirror) over the dashboard.

Setting features

Forward Safety

With the engine on, select or deselect

With the engine on, select or deselect 'Driver Assistance → Forward Safety' from the Settings menu to set whether or not to use each function.

  • If 'Active Assist' is selected, Forward Collision-Avoidance Assist will warn the driver with a warning message and an audible warning depending on the collision risk levels. Braking assist will be applied depending on the collision risk.
  •  If 'Warning Only' is selected, Forward Collision-Avoidance Assist will warn the driver with a warning message and an audible warning depending on the collision risk levels. Braking will not be assisted. The driver must apply the brake pedal or steer the vehicle if necessary.
  •  If 'Off' is selected, Forward Collision- Avoidance Assist will turn off. The warning light will illuminate on the warning light will illuminate on the cluster.

The driver can monitor Forward Collision-Avoidance Assist ON/OFF status from the Settings menu. If the warning light remains ON when Forward warning light remains ON when Forward Collision-Avoidance Assist is ON, we recommend that you have the vehicle inspected by an HYUNDAI dealer.

WARNING

When the engine is restarted, Forward Collision-Avoidance Assist will always turn on. However, if 'Off' is selected after the engine is restarted, the driver should always be aware of the surroundings and drive safely.

CAUTION

If 'Warning Only' is selected, braking is not assisted.

Information

Forward Collision-Avoidance Assist will turn off when ESC is turned off by pressing and holding the ESC OFF button for more than 3 seconds. The light will illuminate on the cluster. warning light will illuminate on the cluster.

Warning Timing

With the engine on, select 'Driver

With the engine on, select 'Driver Assistance → Warning Timing' from the Settings menu to change the initial warning activation time for Forward Collision-Avoidance Assist.

When the vehicle is first delivered, Warning Timing is set to 'Normal'. If you change the Warning Timing, the warning time of other Driver Assistance systems may change.

Warning Volume

With the engine on, select 'Driver

With the engine on, select 'Driver Assistance → Warning Volume' from the Settings menu to change the Warning Volume to 'High', 'Medium' or 'Low' for Forward Collision-Avoidance Assist.

If you change the Warning Volume, the Warning Volume of other Driver Assistance systems may change.

CAUTION

  • The setting of the Warning Timing and Warning Volume applies to all functions of Forward Collision- Avoidance Assist.
  • Even though, 'Normal' is selected for Warning Timing if the front vehicle suddenly stops the initial warning activation time may not seem late.
  • Select 'Late' for Warning Timing when traffic is light and when driving speed is slow.

Information

If the engine is restarted, Warning Timing and Warning Volume will maintain the last setting.

Forward Collision-Avoidance Assist Operation

Basic function

Warning and control

The basic function of Forward Collision- Avoidance Assist is to help warn and control the vehicle depending on the collision risk level : 'Collision Warning', 'Emergency Braking' and 'Stopping vehicle and ending brake control'.

Collision warning

  • To warn the driver of a collision, the 'Collision Warning' warning message will appear on the cluster and an audible warning will sound.
  • If a vehicle is detected in front, the function will operate when your vehicle speed is between approximately 6~112 mph (10~180 km/h).
  •  If a pedestrian or cyclist is detected in front, the function will operate when your vehicle speed is between approximately 6~37 mph (10~60 km/h).
  • If 'Active Assist' is selected, braking may be assisted.

Emergency braking

  • To warn the driver that emergency braking will occur, the 'Emergency Braking' warning message will appear on the cluster and an audible warning will sound.
  • If Forward Collision- Avoidance Assist judges that avoiding a collision is difficult even by changing the driving lane, the function will operate when your vehicle speed is between approximately 6~37 mph (10~60 km/h).
  • If a pedestrian or cyclist is detected in front, the function will operate when your vehicle speed is between approximately 6~37 mph (10~60 km/h).
  • In emergency braking situation, braking is assisted with strong braking power by the function to help prevent collision with the vehicle, pedestrian or cyclist ahead.

Stopping vehicle and ending brake control

  • When the vehicle is stopped due to emergency braking, the 'Drive carefully' warning message will appear on the cluster.

    For your safety, the driver should depress the brake pedal immediately and check the surroundings.

  • Brake control will end after the vehicle is stopped by emergency braking for approximately 2 seconds.

WARNING

Take the following precautions when using Forward Collision-Avoidance Assist:

  • For your safety, change the Settings after parking the vehicle at a safe location.
  • With 'Active Assist' or 'Warning Only' selected, when ESC is turned off by pressing and holding the ESC OFF button for more than 3 seconds, Forward Collision-Avoidance Assist will turn off automatically. In this case, Forward Collision-Avoidance Assist cannot be set from the Settings menu and the light will illuminate on the cluster warning light will illuminate on the cluster which is normal. If ESC is turned on by pressing the ESC OFF button, Forward Collision-Avoidance Assist will maintain the last setting.
  • Forward Collision-Avoidance Assist does not operate in all situations or cannot avoid all collisions.
  • The driver should hold the responsibility to control the vehicle.

    Do not solely depend on Forward Collision-Avoidance Assist. Rather, maintain a safe braking distance, and, if necessary, depress the brake pedal to reduce driving speed or to stop the vehicle.

  • Never deliberately operate Forward Collision-Avoidance Assist on people, animal, objects, etc. It may cause serious injury or death.
  • Forward Collision-Avoidance Assist may not operate if the driver depresses the brake pedal to avoid collision.
  • Depending on the road and driving conditions, Forward Collision- Avoidance Assist may warn the driver late or may not warn the driver.
  • During Forward Collision-Avoidance Assist operation the vehicle may stop suddenly injuring passengers and shifting loose objects. Always have the seat belt on and keep loose objects secured.
  • If any other system's warning message is displayed or audible warning is generated, Forward Collision-Avoidance Assist warning message may not be displayed and audible warning may not be generated.
  • You may not hear the warning sound of Forward Collision-Avoidance Assist if the surrounding is noisy.
  • Forward Collision-Avoidance Assist may turn off or may not operate properly or may operate unnecessarily depending on the road conditions and the surroundings.

WARNING

  • Even if there is a problem with Forward Collision-Avoidance Assist, the vehicle's basic braking performance will operate normally.
  • During emergency braking, braking control by Forward Collision- Avoidance Assist will automatically cancel when the driver excessively depresses the accelerator pedal or sharply steers the vehicle.

CAUTION

Depending on the condition of the vehicle, pedestrian and cyclist in front and the surroundings, the speed range to operate Forward Collision-Avoidance Assist may reduce. Forward Collision- Avoidance Assist may only warn the driver, or it may not operate.

Information

In a situation where collision is imminent, braking may be assisted by Forward Collision-Avoidance Assist when braking is insufficient by the driver.

Forward Collision-Avoidance Assist Malfunction and Limitations

Forward Collision-Avoidance Assist malfunction

When Forward Collision-Avoidance

When Forward Collision-Avoidance Assist is not working properly, the 'Check Forward Safety system (s)' warning message will appear, and the and warning lights will illuminate on the warning lights will illuminate on the cluster. Have the vehicle inspected by an authorized HYUNDAI dealer.

Forward Collision-Avoidance Assist disabled

When the front windshield where the

When the front windshield where the front view camera is located or the sensor is covered with foreign material, such as snow or rain, it can reduce the detecting performance and temporarily limit or disable Forward Collision- Avoidance Assist.

If this occurs the 'Forward Safety system (s) disabled. Camera obscured' warning message, and the and warning lights will illuminate on the warning lights will illuminate on the cluster.

Forward Collision-Avoidance Assist will operate normally when such snow, rain or foreign material is removed.

If Forward Collision-Avoidance Assist does not operate normally after obstruction (snow, rain, or foreign material) is removed, have the vehicle inspected by an authorized HYUNDAI dealer.

WARNING

  • Even though the warning message or warning light does not appear on the cluster, Forward Collision-Avoidance Assist may not properly operate.
  • Forward Collision-Avoidance Assist may not properly operate in an area (e.g. open terrain), where any substance are not detected after turning ON the engine.

Limitations of Forward Collision- Avoidance Assist

Forward Collision-Avoidance Assist may not operate normally, or it may operate unexpectedly under the following circumstances:

  • The detecting sensor or the surroundings are contaminated or damaged
  • The temperature around the front view camera is high or low
  • The camera lens is contaminated due to tinted, filmed or coated windshield, damaged glass, or sticky foreign material (sticker, bug, etc.) on the glass
  • Moisture is not removed or frozen on the windshield
  • Washer fluid is continuously sprayed, or the wiper is on
  • Driving in heavy rain or snow, or thick fog
  • The field of view of the front view camera is obstructed by sun glare
  • Street light or light from an oncoming vehicle is reflected on the wet road surface, such as a puddle on the road
  • An object is placed on the dashboard
  • Your vehicle is being towed
  • The surrounding is very bright
  • The surrounding is very dark, such as in a tunnel, etc.
  • The brightness changes suddenly, for example when entering or exiting a tunnel
  • The brightness outside is low, and the headlamps are not on or are not bright
  • Driving through steam, smoke or shadow
  • Only part of the vehicle, pedestrian or cyclist is detected
  • The vehicle in front is a bus, heavy truck, truck with a unusually shaped luggage, trailer, etc.
  • The vehicle in front has no tail lights, tail lights are located unusually, etc.
  • The brightness outside is low, and the tail lamps are not on or are not bright
  • The rear of the front vehicle is small or the vehicle does not look normal, such as when the vehicle is tilted, overturned, or the side of the vehicle is visible, etc.
  • The front vehicle's ground clearance is low or high
  • A vehicle, pedestrian or cyclist suddenly cuts in front
  • The vehicle in front is detected late
  • The vehicle in front is suddenly blocked by a obstacle
  • The vehicle in front suddenly changes lane or suddenly reduces speed
  • The vehicle in front is bent out of shape
  • The front vehicle's speed is fast or slow
  • The vehicle in front steers in the opposite direction of your vehicle to avoid a collision
  • With a vehicle in front, your vehicle changes lane at low speed
  • The vehicle in front is covered with snow
  • You are departing or returning to the lane
  • Unstable driving
  • You are on a roundabout and the vehicle in front is not detected
  • You are continuously driving in a circle
  • The vehicle in front has an unusual shape
  • The vehicle in front is driving uphill or downhill
  • The pedestrian or cyclist is not fully detected, for example, if the pedestrian is leaning over or is not fully walking upright
  • The pedestrian or cyclist is wearing clothing or equipment that makes it difficult to detect as a pedestrian or cyclist

The illustration above shows the image

The illustration above shows the image the front view camera will detect as a vehicle, pedestrian and cyclist.

  • The pedestrian or cyclist in front is moving very quickly
  • The pedestrian or cyclist in front is short or is posing a low posture
  • The pedestrian or cyclist in front has impaired mobility
  • The pedestrian or cyclist in front is moving intersected with the driving direction
  • There is a group of pedestrians, cyclists or a large crowd in front
  • The pedestrian or cyclist is wearing clothing that easily blends into the background, making it difficult to detect
  • The pedestrian or cyclist is difficult to distinguish from the similar shaped structure in the surroundings
  • You are driving by a pedestrian, cyclist, traffic sign, structure, etc. near the intersection
  • Driving in a parking lot
  • Driving through a tollgate, construction area, unpaved road, partial paved road, uneven road, speed bumps, etc.
  • Driving on an incline road, curved road, etc.
  • Driving through a roadside with trees or streetlights
  • The adverse road conditions cause excessive vehicle vibrations while driving
  •  Your vehicle height is low or high due to heavy loads, abnormal tire pressure, etc.
  • Driving through a narrow road where trees or grass are overgrown
  • There is interference by electromagnetic waves, such as driving in an area with strong radio waves or electrical noise

WARNING

  • Driving on a curve

Forward Collision-Avoidance Assist may not detect other vehicles, pedestrians or cyclists in front of you on curved roads adversely affecting the performance of the sensors. This may result in no warning or braking assist when necessary.

When driving on a curve, you must

When driving on a curve, you must maintain a safe braking distance, and if necessary, steer the vehicle and depress the brake pedal to reduce your driving speed in order to maintain a safe distance.

Forward Collision-Avoidance Assist

Forward Collision-Avoidance Assist may detect a vehicle, pedestrian or cyclist in the next lane or outside the lane when driving on a curved road.

If this occurs, Forward Collision- Avoidance Assist may unnecessarily warn the driver and control the brake. Always check the traffic conditions around the vehicle.

  • Driving on a slope

Forward Collision-Avoidance Assist

Forward Collision-Avoidance Assist may not detect other vehicles, pedestrians or cyclists in front of you while driving uphill or downhill adversely affecting the performance of the sensors.

This may result in unnecessary warning or braking assist, or no warning or braking assist when necessary.

Also, vehicle speed may rapidly decrease when a vehicle, pedestrian or cyclist ahead is suddenly detected.

Always have your eyes on the road while driving uphill or downhill and if necessary, steer the vehicle and depress the brake pedal to reduce your driving speed in order to maintain a safe distance.

  • Changing lanes

[A] : Your vehicle,

[A] : Your vehicle,

[B] : Lane changing vehicle

When a vehicle moves into your lane from an adjacent lane, it cannot be detected by the sensor until it is in the sensor's detection range.

Forward Collision-Avoidance Assist may not immediately detect the vehicle when the vehicle changes lanes abruptly. In this case, you must maintain a safe braking distance, and if necessary, steer the vehicle and depress the brake pedal to reduce your driving speed in order to maintain a safe distance.

[A] : Your vehicle,

[A] : Your vehicle,

[B] : Lane changing vehicle,

[C] : Same lane vehicle

When a vehicle in front of you merges out of the lane, Forward Collision-Avoidance Assist may not immediately detect the vehicle that is now in front of you.

In this case, you must maintain a safe braking distance, and if necessary, steer the vehicle and depress the brake pedal to reduce your driving speed in order to maintain a safe distance.

  • Detecting vehicle

If the vehicle in front of you has

If the vehicle in front of you has cargo that extends rearward from the cab, or when the vehicle in front of you has higher ground clearance, additional special attention is required. Forward Collision- Avoidance Assist may not be able to detect the cargo extending from the vehicle. In these instances, you must maintain a safe braking distance from the rearmost object, and if necessary, steer the vehicle and depress the brake pedal to reduce your driving speed in order to maintain distance.

WARNING

  • When you are towing a trailer or another vehicle, we recommend that Forward Collision-Avoidance Assist is turned off due to safety reasons.
  •  Forward Collision-Avoidance Assist may operate if objects that are similar in shape or characteristics to vehicles, pedestrians and cyclists are detected.
  • Forward Collision-Avoidance Assist does not operate on bicycles, motorcycles, or smaller wheeled objects, such as luggage bags, shopping carts, or strollers.
  • Forward Collision-Avoidance Assist may not operate normally if interfered by strong electromagnetic waves.
  • Forward Collision-Avoidance Assist may not operate for 15 seconds after the vehicle is started, or the front view camera is initialized.

    READ NEXT:

     Forward Collision-Avoidance Assist (FCA) (Sensor fusion)

    Basic function Forward Collision-Avoidance Assist is designed to help detect and monitor the vehicle ahead or help detect a pedestrian or cyclist in the roadway and warn the driver that a collision is imminent with a warning message and an

     Forward Collision-Avoidance Assist Settings

    Setting features Forward Safety With the engine on, select 'Driver Assistance → Forward Safety' from the Settings menu to set whether or not to use each function. If 'Active Assist' is selected, Forward Collision-Avoidance Assist wil

     Forward Collision-Avoidance Assist Operation

    Basic function Warning and control The basic function for Forward Collision- Avoidance Assist is to help warn and control the vehicle depending on the collision risk level : 'Collision Warning', 'Emergency Braking' and 'Stopping vehicle and en

    SEE MORE:

     Heater - Inspection

    Operating Logic Test (Manual only) Inspect the PTC operation with the confirmation logic below : Entering (1) Set the mode to FLOOR. (2) Set the temperature to MAX HOT. (3) Turn off the blower switch. (4) Press the intake (recirculat

     Height adjust

    Component Location Height adjust Replacement Remove the front seat belt upper anchor. (Refer to Front Seat Belt - "Front Seat Belt Pretensioner") After loosening the mounting bolts, then remove the height adjust (A). T

    Information