Station preset

How to preset stations

1. Select the preferred reception mode.

2. Select the preferred station.

3. Press and hold one of the preset buttons (from ) to store theto
frequency. If the button is pressed briefly,) to store the
frequency. If the button is pressed briefly, the preceding selection will remain in the memory.

NOTE

Up to six stations for each reception mode may be preset.

If the connection between the radio and battery is broken for any reason such as vehicle maintenance or radio removal, all stations stored in the preset buttons are cleared. If this occurs, it is necessary to reset the preset buttons.

Selecting preset stations

1. Select the preferred reception mode.

2. Press the preferred preset button (from ) briefly.to) briefly.
) briefly.

Auto-store

Auto-store button:

Using the Auto-store function, you can


Using the Auto-store function, you can automatically store 6 stations on the current waveband (FM-AS or AM-AS) by pressing and holding the auto-store button.

Use Auto-store to quickly find the strongest stations, for example when traveling through different reception areas.

NOTE

When the HD Radio function is turned on, Auto-store cannot be used while receiving a broadcasting station with SPS (Supplemental Program Service).

When you use Auto-store, the new stations replace any stations previously stored.

Interrupting Auto-store: If you accidentally press the auto-store button, you can cancel the Auto-store function before it has been completed as follows.

– switching to the other source mode
– pressing the auto-store button – switching to the other band – turning the “TUNE” dial – pressing the “SCAN” button (type A, C and D audio)

Displaying and selecting preset stations

NOTE

For models with the multi function display, the list of the preset broadcasting stations will be displayed when the “LIST” button is briefly pressed while receiving AM/FM. For details, refer to “Audio screen” .

1. Briefly press the “LIST” button during


1. Briefly press the “LIST” button during AM/FM reception to display the radio screen.

2. Display the preferred preset station by performing either of the following procedures.

– Turn the “TUNE” dial
– Briefly press the seek switch to the side or
3. Press the “TUNE” dial to select the side
3. Press the “TUNE” dial to select the displayed station.